Wednesday, December 7, 2011

A Switch to Compact Fluorescent Light Bulbs Saves You Money

!±8± A Switch to Compact Fluorescent Light Bulbs Saves You Money

In case you hadn't noticed, the "Green Movement" is taking hold. More and more people are realizing that we, as individuals, need to do something about pollution, and we need to start now.

The problem is that with all the media hype, most people think it's too hard a job to go green. In truth, there are literally thousands of easy ways to go green. One of the most cost efficient and easiest ways to go green is to switch from incandescent light bulbs to compact fluorescent light bulbs (CFL's).

History of Early Compact Fluorescent Bulbs

Not many people realize that fluorescent light bulbs have been around since the 1800's. In the 1970's, General Electric improved the design, but found it was too expensive to build factories to mass produce the bulbs. The use of these bulbs was generally limited to office buildings, garages and under the kitchen cabinets.

In addition, the light they gave off was not of the quality we expected from an incandescent light bulb. The shape also restricted their use to a fixture that would allow the use of a long tubular bulb. They could not be easily used in table lamps, desk lamps or floor lamps.

Another factor that limited their use was that they often flickered and made an annoying humming noise.

In recent years, all that has changed. Improvements in the bulbs, especially with the development of the electronic ballast, have eliminated most of the negative features that made them less popular in the past.

The Pros of Compact Fluorescent Lamp, (CFL'S)

Listed here are some of the positive reasons to switch to CFL's:

1. CFL's now are shaped to fit nearly all our light fixtures.

2. The light they give off is comparable to traditional light bulbs.

3. They use 75-80% less electricity then traditional light bulbs.

4. A 60w standard bulb can be replaced with a 13-15w CFL Bulb to give the same amount of light.

5. The CFL bulbs last ten times longer. The average life of a CFL is 10,000 hours compared to less than 1,000 hours for a standard bulb.

6. It is estimated that using one CFL bulb will keep one half a ton of carbon dioxide from being dumped into the atmosphere over the life of that bulb.

7. The CFL bulb is less hot to touch, so is easier to change if it had been lit.

8. There will be eight less incandescent light bulbs that find their way into landfills if CFL's are used.

9. CFL's now come in many designs and can be used for many different applications.

10. The installation of CFL's can earn a discount with some utility companies.

The Cons of Modern Compact Fluorescent Bulbs, (CFL'S)

As with anything, there are some negative features to these bulbs that should be taken into consideration when you decide to make the switch.

1. CFL's have a higher initial cost.

2. CFL's do not work well in places where the light is switched on and off frequently. This will reduce the life span of the bulb.

3. Not all CFL' can be used with dimmer switches. Special bulbs are required for this application. Again the life of the bulb will be shortened.

4. Some timer mechanisms are incompatible with CFL's.

5. Not all bulbs are suitable for outdoor use. Low temperatures may reduce light levels.

6. CFL's contain a small amount of mercury which is toxic. Mercury vapor can be released if the bulb is broken.

7. Bulbs of inferior quality are showing up on the store shelves and may not be of high quality and will not last as long.

Despite the negatives, CFL's have become extremely popular in the last several years.

Benefits of CFL's

Replacing one 60 watt standard bulb with a 15-w CFL will save you more than in electricity costs over the life of the bulb if you use it 6 hours a day. Add to that less trips to the store, and less money spent on replacement bulbs, the savings are significant.

Multiply that times the number of light bulbs you have in your home and you could realize a significant savings in both money and energy consumption.

Some states require that burned out CFL's be disposed of at a hazardous waste facility (the preferred method of disposal) while most municipalities allow them to be disposed of in regular trash. CFL's can easily be recycled at stores such as Home Depot and Ikea.

CFL's do contain a small amount of mercury and opponents to these bulb cite that as a major drawback. One should just remember to never incinerate these type bulbs. This will disperse the mercury into the atmosphere.

Conclusion

The benefits of CFL's have become evident in terms of the amount of energy saved and the amount of green house gasses that are not being pumped into the atmosphere. If everyone in the US used CFL's we could retire 90 average size power plants.

In an effort to reduce greenhouse gasses, Australia and Canada have already banned the use of incandescent bulbs and the United States has passed legislation that is phasing out the manufacture of incandescent light bulbs and will ban them entirely by the year 2012.

Replacing energy-hogging incandescent bulbs with energy-saving fluorescents (CFLs) is a simple, effective way to slow the rate of global climate change while saving money. It's good for the environment, it's economical, it's efficient, and it's easy.


A Switch to Compact Fluorescent Light Bulbs Saves You Money

Price Brita Water Coupon 18 Hour Playtex Bra Buy Online Best Electric Razors Right Now

Monday, November 14, 2011

Green Lighting - Kid-Friendly Solar Energy Info

!±8± Green Lighting - Kid-Friendly Solar Energy Info

Learning About Solar Energy From the Dept of Energy: It's a bit cloudy

Interest in solar energy as an energy source rises and sets along with the tax credits that fuel its growth. Because I am essentially a kid at heart, I visited the Energy Kid's Page of the Energy Information Administration to learn more.

The Energy Information Administration (EIA), created by Congress in 1977, is a statistical agency of the U.S. Department of Energy. "Our mission is to provide policy-neutral data, forecasts, and analyses to promote sound policy making, efficient markets, and public understanding regarding energy and its interaction with the economy and the environment."

The Energy Kid's Page starts off in a friendly manner in a way that even I could understand:

The sun has produced energy for billions of years. Solar energy is the sun's rays (solar radiation) that reach the earth.

Some of this solar energy is converted to heat, which is used to heat water and building interiors.

So far, so good.

Solar energy can be converted to electricity in two ways:

Photovoltaic (PV devices) or "solar cells" - change sunlight directly into electricity. PV systems are often used in remote locations that are not connected to the electric grid. They are also used to power watches, calculators, and lighted road signs. Solar Power Plants - indirectly generate electricity when the heat from solar thermal collectors is used to heat a fluid which produces steam that is used to power generator. Out of the 15 known solar electric generating units operating in the United States at the end of 2006, 10 of these are in California, and 5 in Arizona. No statistics are being collected on solar plants that produce less than 1 megawatt of electricity, so there may be smaller solar plants in a number of other states.

With childlike wonder, I pressed further, wanting to learn how energy-efficient, renewable solar energy can help reduce fossil-fuel-generated electricity (half of which comes from burning coal, which in turn creates the 104 tons of mercury annually we have the pleasure of breathing, drinking, and eating).

So I dug into the Photovoltaic Section. Without warning or proper disclosure, The Energy Kid's Page sent me back to college for my PhD in electronics. (Guys: Seriously, do you really think your Kid Page is kid-friendly?!)

With quick googling, I found an online university and enrolled, studied night and day for four entire weeks, got my PhD, and now am delighted to give you this kid-friendly explanation of solar energy.

We'll shine a light on photovoltaic energy and the three types of solar power plants.

Photovoltaic Energy

Photovoltaic energy is the conversion of sunlight into electricity. A photovoltaic cell, commonly called a solar cell or PV, is the technology used to convert solar energy directly into electrical power. The solar cell is a nonmechanical device usually made from silicon alloys.

Sunlight has photons. Photons have energy. The solar cell gets slammed by photons and absorbs some of them. Others bounce right off like basketballs or pass through like ghosts.The absorbed photons knock electrons out of place. Electrons are the stuff that electricity is made of. The electrons bubble up to the surface of the solar cell.This movement to the surface creates an imbalance. When you hook up a wire from the solar cell to an outside battery, you create a path that the electrons will follow.That flow into the battery is electricity.

A single photovoltaic cell will power your calculator and your curiosity, but not much more. At 1 or 2 watts, you need hook up a bunch together to get some real juice flowing. This is called an array, and can include as many cells as you can afford. Definitely a case of the more you spend, the more you save.

Don't Stick It Where The Sun Don't Shine

Sunlight is constant - the clouds and fog are not. Climate conditions significantly effect the amount of solar energy received by a photovoltaic array and, in turn, its performance. Most current technology photovoltaic modules are about 10 percent efficient in converting sunlight. Further research is being conducted to raise this efficiency to 20 percent.

AC/DC: Conversion

The battery collects direct current (DC). You need alternate current (AC) flowing through your light fixtures. Solid state devices called inverters convert DC power to AC. Problem solved.

Photovoltaic Energy Recap: photovoltaic or solar cells absorb the slings and arrows of outrageous photons from the Sun, which shove electrons to the surface of the cells, where you store them by having them flow through a wire into a battery. You break out your inverter to make that battery energy usable. But at 10% efficiency, they suck big time in consistently poorly lit areas, such as Sweden during November to January when they're nearly blacked out and lighting their way with seal blubber candles and Ikea accent lamps.

Next up, kids (and I'll keep it friendly):

Solar Thermal Power Plants

Solar thermal power plants use the sun's rays to heat a fluid, which is put into water and turns it into steam. The steam propels a turbine that powers a conventional generator that creates electricity. Solar thermal power generation works essentially the same as generation from fossil fuels except that instead of using steam produced from the combustion of fossil fuels, the steam is produced by the heat collected from sunlight. Solar thermal technologies use concentrator systems due to the high temperatures needed to heat the fluid.

In short, they replace fossil fuels with solar energy to run turbines which create electricity.

The three main types of solar-thermal power systems are:
parabolic troughs solar dish, and solar power tower
Parabolic Troughs

The most common type of solar plant, the parabolic trough is used in the largest solar power facility in the world located in the Mojave Desert at Kramer Junction, California. This facility has operated since the 1980's and accounts for the majority of solar electricity produced by the electric power sector today.

A parabola is U-shaped. The parabolic trough is like a magnifying glass: it takes sunlight and focuses it on a spot to heat it up. That spot is on a tower, surrounded by all the parabolic troughs. It heats the spot up to 400 degrees Celsius. The parabola can follow the Sun's movement during the day in order to get the most sunlight.

The spot that is heated up is filled with fluid. This fluid flows to heat up water and create steam. The steam propels a turbine that powers a conventional generator that creates electricity. The fluid cools down a bit and is returned to the spot on the tower to be reheated to 400 degrees.

The plant is usually designed to operate at full rated power using solar energy alone, given sufficient solar energy. However, all plants are hybrid solar/fossil plants that have a fossil-fired capability that can be used to supplement the solar output during periods of low solar energy. This defeats the purposes of generating renewable energy, but I guess the scientists know what they're doing.

Solar Dishes

A solar dish/engine system utilizes concentrating solar collectors that track the sun on two axes, concentrating the energy at the focal point of the dish (the box-like thing sticking out from the center of it) because it is always pointed at the sun.

The solar dish's concentration ratio is much higher that the solar trough, typically over 2,000, with a working fluid temperature over 750 degrees Celsius. The power-generating equipment used with a solar dish can be mounted at the focal point of the dish, making it well suited for remote operations or, as with the parabolic trough, the energy may be collected from a number of installations and converted to electricity at a central point.

The engine in a solar dish/engine system converts heat to mechanical power by compressing the working fluid when it is cold, heating the compressed working fluid, and then expanding the fluid through a turbine or with a piston to produce work. The engine is coupled to an electric generator to convert the mechanical power to electric power.

Solar Power Tower

A solar power tower or central receiver generates electricity from sunlight by focusing concentrated solar energy on a tower-mounted heat exchanger (receiver).

This system uses hundreds to thousands of flat sun-tracking mirrors called heliostats to reflect and concentrate the sun's energy onto a central receiver tower. The energy can be concentrated as much as 1,500 times that of the energy coming in from the sun. Energy losses from thermal-energy transport are minimized as solar energy is being directly transferred by reflection from the heliostats to a single receiver, rather than being moved through a transfer medium to one central location, as with parabolic troughs. Power towers must be large to be economical. This is a promising technology for large-scale grid-connected power plants. Though power towers are in the early stages of development compared with parabolic trough technology, a number of test facilities have been constructed around the world.

What We Learned Today

We learned that solar energy can be used to heat water and interiors.

Next, we learned that solar energy can be converted to electricity using photovoltaic cells and solar thermal power plants. The photovoltaic cells take in photons, which shove aside electrons. The electrons, seeking a new home, journey in mass across a wire to their new land called Battery. Solar thermal power plants work by focusing sunlight to heat a fluid, and that fluid turns water into steam, which runs a turbine, and that turbine is the engine to run an electric generator.

And most important, we learned that, no matter what you label something, such as being designed for kids, that does not make it so. I think we need to call in the Department of Commerce to enforce the Truth-in-Labeling Act with the Department of Energy's Energy Kid's Page, one of the most kid-unfriendly websites known as mankind. And I'm going downtown right now to file a claim for reimbursement of my expensive online tuition for the PhD I had to get just to understand this Energy Kid's Page.


Green Lighting - Kid-Friendly Solar Energy Info

Low Cost Corsicana Mattress Cheap Grasshog Gh600

Monday, October 24, 2011

Lite Source KIT-2965PS/FRO Unirail-Line Voltage 8-Foot Track Light Kit with 3 Heads And 2 Pendants, Polished Steel with Frost Glass Shade

!±8± Lite Source KIT-2965PS/FRO Unirail-Line Voltage 8-Foot Track Light Kit with 3 Heads And 2 Pendants, Polished Steel with Frost Glass Shade


Rate : | Price : $261.41 | Post Date : Oct 24, 2011 12:51:04
Usually ships in 24 hours

  • Dimension of the Lamp: 95"W x 95"H
  • Dimension of the Shade: 5.75"BD(L) x 1.25"TD(L) x 4"H
  • Finish: Polished Steel / White
  • Material: Metal / Glass
  • 3 Spot and 2 Pendant Ceiling Light - Unirail Collection
  • 35W x 5 Halogen.
  • GU10 Type Bulb (Bulb Included).
  • Assembly required.

Order Ridgid Wrench Mako Razer Buy Now

Tuesday, October 11, 2011

Lite Source KIT-2973D/BRZ Unirail-Line Voltage 4-Foot Track Light Kit with 3 Lights, Dark Bronze with Amber Glass

!±8± Lite Source KIT-2973D/BRZ Unirail-Line Voltage 4-Foot Track Light Kit with 3 Lights, Dark Bronze with Amber Glass

Brand : Lite Source | Rate : | Price : $156.72
Post Date : Oct 11, 2011 17:00:34 | Usually ships in 2-3 business days


  • Lite Source 4-Foot Track Light Kit With 3 Lights with Dark Bronze body, from the Unirail-Line Voltage Collection
  • Amber Glass
  • Shade Dimensions: 1.25-Inch top x 3.5-Inch bottom x 2.25-Inch height
  • Lamp dimensions: 16-Inch x 47.5-Inch x 47.5-Inch
  • Requires 3 x 35 Watt BI-STEM-socket GU10-type bulb (not included)

More Specification..!!

Lite Source KIT-2973D/BRZ Unirail-Line Voltage 4-Foot Track Light Kit with 3 Lights, Dark Bronze with Amber Glass

Discount Twig Chandelier Comparison Samsung Plasma Pn50b860

Tuesday, October 4, 2011

Unirail 4' Track Light Kit 3Lite - Bronze

!±8±Unirail 4' Track Light Kit 3Lite - Bronze

Brand : Lite Source
Rate :
Price : $157.50
Post Date : Oct 04, 2011 09:31:06
Usually ships in 24 hours



Finish:Dark Bronze, Shade:Amber, Light Bulb:(3)35w MR16 GU10 120v Halogen Unirail 3-light track lighting kit.

  • One TK-24 four foot track section
  • Three TT-2983 line voltage track heads with textured amber glass diffusers
  • One TC-8 line voltage power feed
  • One TC-6 support strut

Delta Leland Faucet Buy Online Promotions Kitchenaid Ksm150 Mixer

Thursday, September 29, 2011

Futuristic Web Design: what the future holds

!±8± Futuristic Web Design: what the future holds

It is a decade of small steps taken, but the web is finally starting to grow. We back the dark days when the thought brochureware company, banned their annual reports that the scan page by page in half megabyte GIF was the way to build an online presence. We build from the nightmare of nested tables that would not have woken IKEA box, thanks to the browser, the (mostly) style sheets, without affecting programmer. And, fortunately, mostPeople have their enthusiasm with flash itself must recognize that the vortex geometries two minutes the next thing you turn on your whole page in front of a back button.

Call it a rebirth if you will, but the only way, no matter what you want to get on the web. Design connoisseurs can now CSS, JavaScript and Flash to stretch their limits, while clean, light, elegant embrace of Web sites, different platforms and even reduced to meet themobile web. At the same time, that should not be more interested in content to sacrifice good looks for gloss text, and of publishing tools that make it easy for others to draw comment, contribute and collaborate online. Sites bleeding edge of today are the needs and desires of both its authors and their visitors led: they are flexible, open and accessible to do. Above all, they are driven users: While it is always true, so that the ego is in the pipelineas HTML, we begin to grassroots projects that distinctive look to offer personal views, while embracing what their audience what they can expect from the Web and the Web. The vision of the manufacturer's website "Daily Me" Daily Us 'is evolving in the bloggers' and there is much about.

From the interactive, integrative

One of the first objectives of Site Builder, back to what the Web is called the Stone Age, was a bit 'of life in the static setting, you only read websites.The murky world of CGI was (and is) that has kept out of reach of most HTML jockeys, which means that no browser-based technology to add interactivity to be pretty lame. Review the IP address of a visitor or as a script to build a pop-up "Hello Dave" If your name is not really the best of technology.

Even until recently, there was a digital divide between the fire-sale prices for manufacturers more interactive sites and places control of upper extremitysupported by dynamic and database servers. But now, with the introduction of intelligent publication of the site that allow this sort of impasse "interactivity" are bits thrown in the bucket. Ironically, however, much of the customization offered by major portals also been shown to be misleading. While selecting capable, messages or multimedia streams seemed to be a big problem in the nineties, in retrospect, from "old media" expectations seem too much like buying a newspaper linked to sportOr you can use the TV remote control. What has emerged in recent years, so it is a redefinition of what it should mean for web interactivity, which draws on various forms of online interaction that are already growing, or e-mail, newsgroups, chat rooms and instant messaging. So it's time to put aside notions of interactivity mute switch, "which is poured into the Web as a giant video game, and instead of a new era of" inclusiveness ", built in places that are so complexInteractions, but very human scale.

Navigating the Future

A little more than a century ago, designers created an innovative "navigation" system, which could potentially prove fatal to the user, which is why they were with the design of controls for the first generation of cars. It took years of competition, caused countless accidents and plenty of wounded ego before a standard layout. The attempt to websites with funky navigation is not as dangerous as driving with a visit to the pedals backpeople expect the stability of the technologies as they mature, even if the road is not always the best way: the first, but the same principle applies. So while it will still be enormous liberties with radical approaches for navigating Web-based, future-oriented site developers tend to focus more on refinement of the well-worn patterns of operating systems and popular sites sidebar, and horizontal tabs clickable 'breadcrumb 'way, so that they work better, cleaner andefficiently.

If you have kept away from the darker aspects of CSS, you are in power and flexibility of hours to create and wonder, complete with tabs, rollovers, and sub-menu, without resorting to image files, complex scripting, Java or Flash for navigation stylish . That's not to say that Flash should be completely off limits to be careful that you do not provide basic usability victims, including the ability to deep link to use the browser back and forward buttons to FavoritesCycle between the parties. And remember that users with disabilities or behind proxy can be denied access. In short, it is best to avoid using Flash for the main navigation, and save it for special occasions.

While the look and feel of web browsing can stabilize, it is not stagnant. This is due to the growth of user-centered architecture, which tries to avoid the old habit of dividing sites in layers upon layers of sub-directories. If mimicking a corporate hierarchy orfolders on the hard disk of a typical encoder, the multidimensional approach to the visitor can often do not know where to look for information, the frustration of digging deep to Sun Instead, try to create user-centered site for the needs and demands of visitors to anticipate new site or if you know how they work.

Plug-in participation

There are many dynamic components are freely available for personal websites and small, who can add some 'stickiness all importantThe mysterious quality that encourages visitors to return for future visits. An easy way to start is to add a poll to your website. Another popular way to attract visitors is integrated Flash and Shockwave games, puzzles and quizzes on your site.

Care for the community

While you can take advantage of the generosity of other people, some sparkle to your website, which should only be a starting point. After all, the stickiest of all the promises of regularupdated original content. If visitors can not go elsewhere to get their daily dose of shine on your spirit, wisdom and creativity, you can guarantee that he will come again! The ability to update your web pages at regular intervals, with no design or programming skills elites, the Web has changed in recent years. So that visitors to comment and contribute goes a step further and create a truly integrated online experience. We talk about blogs, of course.

Many developers complain that thePlethora of blogs, has lowered the standards of web design, creating a gap between those who care about the look of their websites and those who just want to knock out a dozen messages a day and it is true that most of the multi-blog Family-column layout built to follow the standard models.

What is beyond doubt that blogs are like most people who surf the Internet tune these days: the latest content to track forward and easy to navigate, and are very lightBookmarks. They also particularly well with Google through the rich text-based content is one reason why Google bought Blogger. And there are many examples of beautifully designed blogs, as if to prove Loobylu not have to sacrifice graphics and programming skills to build a website with a rich and original content that people want to visit from time to time create. If you tack on, is the world of blogs, like a giant tub of honey.

The biggest advantage of building sitesaround the model of blogging is that they have a vibrant community behind the scenes. This is most obvious with websites that are easy for users, images, emoticons, and comment on all the opportunity to add their voices, and activate the "community" based on common interests to join. Sure, many sites seem a bit 'like your eccentric uncle's DIY projects, but there is plenty of room for your cake design and Web publishing tools make it incredibly easy toPart of a community, or track your individual contributions to other users and add your comments.

The vibrant community-oriented Web sites now tend to be original content, the author of collaboration, external links, user comments and much more, all packed in clean, before combining design. While many community sites Weblogging tools are secured, the old-style bulletin board still worth a look.

Building for broadband

Adventurer firstBuilding for users with higher bandwidth will allow you to background music and heavy Flash interfaces that provide its identity and purpose of capturing your site. Right now, the best examples of these in places where "old media" producers to adapt the work of the radio industry, television and music to the web.

The blue-sky future

So where is the future for the Web, such as broadband becomes the norm and the increasingly important community sites? And 'fromfound in the rich world of text-based sites or blog sites that more and more layers of rich media brings the Web? Well, it's safe to say that both have their place. While Google remains the primary tool for most people to dig up the information they have questions before blogs and other content heavy sites Eminence consider popular. At least it's up to Flash designers have the technology at hand to build websites that integrate easily into GoogleFindings such as working with simple HTML, or until Google or other search engines mature enough to classify and index the growing amount of Web content that is audio and video format. That day can not be too far away. Since the tools to create multimedia content is no longer the privileged domain of high-end professionals, thanks to growing consumer market for audio and video editing tools, is likely to provide a sufficient demand (and wisely enough programmers) are starting toReassignment of the web as something more than a world of text pages. Instead, try and influence the ability of CSS to increase, since it is Google-friendly simplicity and the potential of highly graphical user interface provides.

Looking back at the predictions made in the late nineties, it is fair to say that the Web has evolved radically over the past five years less than expected most designers. Many hyped technologies such as XML and scalable vector graphics, they are stillShooting in style. This is due in part to the development of technology stuttering browser to take on new standards and partly because the consolidation replaces innovation in the years following the dotcom crash. To develop, but now, with new attitudes toward Web site design and technologies to implement this, you probably see a new creative spirit embrace the Web as it is inclusive spirit of blogging and the convergence of rich media have a role to play togetherwith other interactive tools such as instant messaging.

This probably means that they must be smarter and more creative local builders today in five years? Maybe. But the tools would be available to work, and the space that they have been transformed to make it easier to get their creative visions online. E 'already can update and contribute to the sites via the phone. We are now trying to load, and high-resolution streamingVideo or dictate and receive updates of the website while driving. Interfaces site will evolve to reflect that breaks from the Web as "something that is on our computers', and a part of our daily lives. Designing for this type of online experience will be light years away from knocking together a menu bar for the Your personal website. not only to be left behind to create fear. It 'l', ambition, skill and imagination of the manufacturer's site is where we aretoday, and it is those qualities that will change the Web in the coming years.


Futuristic Web Design: what the future holds

Buy Phillips Heartstart Home Defibrillator


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links